2–6 Hardware Reference Guide
Working with the MultiBay
Inserting a Drive into the MultiBay
If the device does not start, ensure that the necessary device drivers
are installed on the system. If they are not available, they may be
downloaded, at no cost, from the Compaq Web site at
www.compaq.com.
Removing a Drive from the MultiBay
1. Exit all software applications, shut down the operating system
software, and turn off the personal computer if you are inserting
or removing a hard drive.
2. Remove the MultiBay security screw, if it has been installed.
Refer to “Uninstalling the MultiBay Security Screw” on
page 2-4.
sp-hrg.book Page 6 Thursday, December 13, 2001 9:14 AM