Hardware Reference Guide 3–1
3
Adding System Memory and
Upgrading the Internal Hard Drive
General Precautions
Before adding system memory or upgrading the hard drive be sure to
carefully read all of the applicable instructions, cautions, and
warnings in this guide.
Å
WARNING: To reduce the risk of personal injury from electrical shock
and/or hot surfaces, be sure to disconnect the power cord from the wall
outlet, and allow the internal system components to cool before
touching.
Ä
CAUTION: Static electricity can damage the electronic components of
the personal computer or optional equipment. Before beginning these
procedures, ensure that you are discharged of static electricity by briefly
touching a grounded metal object. Refer to Appendix C, “Electrostatic
Discharge” for more information.
Removing and Replacing the Access Panel
To access system memory or the internal hard drive, you must remove
the access panel as shown below:
1. Exit all software applications, shut down the operating system
software, turn off the personal computer and any external devices,
then disconnect the power cord from the power outlet.
sp-hrg.book Page 1 Thursday, December 13, 2001 9:14 AM
To Next Page
Loading...
Need help?
General