Compaq Evo N600c - Obtaining, Saving, or Printing Diagnostic; Test Information

2–8 Maintenance and Service Guide
Troubleshooting
Obtaining, Saving, or Printing Diagnostic
Test Information
1. Access Compaq Diagnostics by selecting Start > Settings >
Control Panel > Compaq Diagnostics.
2. Select the Test tab.
3. In the scroll box, select the category or device you want
to test.
4. Select a test type:
❏ Quick Test—Runs a quick, general test on each device in
a selected category.
❏ Complete Test—Performs maximum testing on each
device in a selected category.
❏ Custom Test—Performs maximum testing on a selected
device.
◆ To run all tests for your selected device, click
Check All.
◆ To run only the tests you select, click Uncheck All,
then select the checkbox for each test you want
to run.
279362-003.book Page 8 Monday, May 19, 2003 1:28 PM