Compaq Presario 5000 Series - Configuration

United States
STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
Compaq Presario Internet PC 5000 Series Computers
Troubleshooting
PRODUCT DESCRIPTION
TROUBLESHOOTING
ILLUSTRATED PARTS CATALOG
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
INFORMATION
SPECIFICATIONS
Clearing CMOS
Power-On Self
Test (POST)
Configuration
Diagnostic error
codes
Troubleshooting
without diagnostics
Configuration
This section explains how to use Setup and Compaq Utilities which should be accessed in the following
ways:
When a system configuration error is detected during the POST.
1.
To change factory default settings for some of the computer features.2.
To change the system configuration, which is sometimes necessary when you add or remove
optional hardware.
3.
To set system configuration features.4.
Click a link below to go to the appropriate subsection:
Preparing the Computer
Setup
Accessing Compaq Utilities Options
View System Information (INSPECT)