Compaq Presario Internet PC 5000 Series Computers
Removal and Replacement Procedures
PRODUCT DESCRIPTION TROUBLESHOOTING ILLUSTRATED PARTS CATALOG
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
INFORMATION
SPECIFICATIONS
Electrostatic
Discharge
Service
Considerations
Preparation for
Disassembly
Serial Number
Side Access Panel
Graphics Card
Expansion Card
(Modem or Network
Card)
1394 Card
Memory Module
Hard Drive
Disk Drive
Removing the Top
Door
Removing the CD
Storage Door
(Lower Front Panel -
Open the CD Storage
Door)
Optical and Mass
Removing the Side Access Panel
Removal
Perform the preparation
procedures.
1.
Remove the screws from
the rear of the access panel.
Note: Number of screws
varies by model.
2.
Locate the latch and
press down, and then hold in
position.
3.
Next Step