Compaq Presario 5000 Series - Page 90

United States
STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
Compaq Presario Internet PC 5000 Series Computers
Removal and Replacement Procedures
PRODUCT DESCRIPTION TROUBLESHOOTING ILLUSTRATED PARTS CATALOG
REMOVAL AND REPLACEMENT
PROCEDURES
JUMPER AND SWITCH
INFORMATION
SPECIFICATIONS
Electrostatic
Discharge
Service
Considerations
Preparation for
Disassembly
Serial Number
Side Access Panel
Graphics Card
Expansion Card
(Modem or Network
Card)
1394 Card
Memory Module
Hard Drive
Disk Drive
Removing the Top
Door
Removing the CD
Storage Door
(Lower Front Panel -
Open the CD Storage
Door)
Optical and Mass
Replacing the Microprocessor/Heatsink Assembly, Continued
Replacement
Align corner
(see
graphic) of the
microprocessor with Pin 1 on
the microprocessor interface
socket on the system board.
7.
Place the microprocessor
into the microprocessor
interface socket on the
system board. Close the
lever
to lock the
microprocessor in place.
8.
Next Step