Removal and Replacement Procedures
Maintenance and Service Guide 5–65
✎
Steps 2 and 3 apply to processor sockets equipped with a
locking screw. Refer to steps 4 through 6 for instructions on
removing a processor from a socket equipped with a release
arm.
2. Use a flat-bladed screwdriver to turn the processor locking
screw 1 one-quarter turn counterclockwise until you hear a
click.
3. Lift the processor straight up and remove it 2.
✎
The gold triangle 3 on the processor should be aligned in the
front right corner when you install the processor.
Removing the Processor from a Socket with a Locking Screw
To Next Page
Loading...
