Signs that a die set is not functioning properly:
(1) Dough leaks from in between the two die halves
(2) The pans are severely distorted or even damaged by the die set
(3) The dough does not form a complete, perfect crust
(4) The pans and dough stick excessively to the die.
(5) The stripper pins will pierce the rim of the pan.
Bend in middle of spring is higher than the ends of
the spring.
INCORRECT ORIENTATION.
Ends of spring are higher than the bend in the
middle of the spring.
The ends of the flat springs
should be touching the die
Please consult your operator’s manual for a diagram showing correct flat spring
placement and orientation.
To Next Page
Loading...