THIS DOCUMENT IS THE PROPERTY OF XICOM TECHNOLOGY. REPRODUCTION OR RELEASE WITHOUT EXPRESS PERMISSION IS STRICTLY PROHIBITED.
XTD-750K, 12.75 - 14.5, L01
Document No. 305-0391-032 REV 4 Page 3 of 10
3.1.10 Noise Power
3.1.10.1 Transmit Band -70 dBw/4kHz max
3.1.10.2 Receive Band -150 dBw/4kHz max
3.1.11 Group Delay, any 80 MHz
3.1.11.1 Linear 0.01 nS/MHz max
3.1.11.2 Parabolic 0.005 nS/MHz squared max
3.1.11.3 Ripple 0.5 nS/Pk-Pk max
3.1.12 Residual AM Noise -50 dBc 10 Hz to 10 kHz max
-20(1.5+Log(Freq)) dBc 10 kHz to 500 kHz max
-85 dBc above 500 kHz max
3.1.13 Phase Noise profile 10 dB below IESS phase noise
3.1.14 Spurious Signals
3.1.14.1 Spurious Signals, spectral limits -37 dBc 10 Hz to 10 kHz max
-20(1.5 + log(f))+13 dBc 10 kHz to 500 kHz max
-72 dBc above 500 kHz max
3.1.14.2 Power Line Related, individual -50 dBc
3.1.14.3 Power Line Related, sum of all -47 dBc
3.1.15 VSWR
3.1.15.1 Input 1.3:1 max
3.1.15.2 Output 1.3:1 max
3.1.16 Prime Power 180-260 VAC
2,450 VA max
0.95 Power factor min
47 to 63 Hertz
Single Phase
3.1.17 Serial Interface
3.1.17.1 RS-232 Monitor and Control
3.1.17.2 RS-422/485 (4-Wire Mode or Monitor and Control
2-Wire Mode)
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
To Next Page
Loading...