THIS DOCUMENT IS THE PROPERTY OF XICOM TECHNOLOGY. REPRODUCTION OR RELEASE WITHOUT EXPRESS PERMISSION IS STRICTLY PROHIBITED.
XTD-750K, 12.75 - 14.5, L01
Document No. 305-0391-032 REV 4 Page 5 of 10
3.1.19 Monitoring
3.1.19.1 Monitoring, local
3.1.19.1.1 Front Panel LED
3.1.19.1.1.1 Standby Color = Amber
3.1.19.1.1.2 FTD Color = Blinking Amber 3 minutes min
3.1.19.1.1.3 HV On Color = Green
3.1.19.1.1.4 Auto HV On Color = Blinking Green
3.1.19.1.1.5 HV On, RF Inhibit Color = Blink Amber then Blink Green
3.1.19.1.1.6 Summary fault Color = Red
3.1.19.2 Monitors, Remote
Function
3.1.19.2.1 Output Power
3.1.19.2.2 Reflected Power
3.1.19.2.3 TWT Temperature
3.1.19.2.4 Helix Current
3.1.19.2.5 Helix Voltage
3.1.19.2.6 Heater Voltage
3.1.19.2.7 Heater Hours
3.1.19.2.8 Beam Hours
3.1.19.2.9 High VSWR Fault
3.1.19.2.10 High Voltage Fault
3.1.19.2.11 Helix Current Fault
3.1.19.2.12 TWT Temperature Fault
3.1.19.2.13 Summary Fault, QTY 2
3.1.19.3 Monitors, local & remote
3.1.19.3.1 FTD
3.1.19.3.2 Standby
3.1.19.3.3 HV On
3.1.19.3.4 Htr Standby
3.1.19.3.5 Local/Remote
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
To Next Page
Loading...