BALL BEARING
L For cleaning of the ball bearing use a dry piece of cloth or a smooth dry toothbrush to remove the dust or
moisture and foreign particles that stick.
L Following points have effect on the lifetime of the ball bearing:
o Abrasive materials
o Temperature
o Dusty/fine powder materials
6.5 Electrical installation
The Dual TrueFeed controller is equipped as standard with the following connections:
Main power cable
L Before switching on the unit for the first time, ensure the main power voltage being
applied is between 80 and 260V.
Input cable
2 Motor cables, 1 for Regrind and 1 for Color
2 Loadcell connectors, 1 for Regrind and 1 for Color
Network connection
1 controller with display (Regrind unit) and 1 controller with blind lid (Color unit)
Compressed air solenoid valve complete with cable for automatic hopper loader (Regrind)
Options are:
Alarm strobe light, complete with cable
Compressed air solenoid valve complete with cable for automatic hopper loader (Color)
10 Dual Feed TrueFeed Manual
To Next Page
Loading...