Alarm LED is lighted:
Alarm / Warning
Enter / scroll / exit MENU
Start LED blinking:
Motor is stand by / waiting for start signal
Start LED lighted:
Motor is running
Arrow up / down:
Scroll through parameters
Arrow left / right:
Scroll through menus /
settings
lpha-numerical
buttons:
Set values /
descriptions
Enter:
Confirm settings /
Pick up a JOB
Start:
Start unit
Stop:
Stop unit
Input LED is lighted:
Input signal is ON
7. Operation
7.1 Navigation
L Note that from the color unit the internal dipswitch 1 = ON on the main board. (see Appendix A)
Loadcell
External communication /
Network
Mains power switch: ON / OFF
Mains power cable
Start input cable
Motor cable
Valve output
for hopper loader
Output for:
-Alarm
-Warning
-Running
RJ45
Crossed
UTP cable
REGRIND
UNIT
12
Dual Feed TrueFeed Manual
COLOR
UNIT
To Next Page
Loading...