7.2 Start-up & Login
Immediately after switching on the main power of the Dual TrueFeed, the software versions will be displayed.
In the first screen the software version of the terminal will be shown.
After a few seconds the second screen appears for 10 seconds.
Vx.x = user software version Vx.x
SP-Vx.x = Language version Vx.x
(Default language is English)
SP means that the alternative language is Spanish.
BL Vx.x = bootloader software (firmware) Vx.x
Mac address = ID address of the network card
The Dual TrueFeed controller has three user levels:
1. Operator 2. Tooling (Supervisor – level 1) 3. Supervisor (Service – level 2)
The functions for each user level are shown in the table below.
The Operator Level is the lowest level; only the settings for production can be altered. The reminder of the
settings/menus are not displayed or are locked.
To access a different user level, enter the LOGIN menu and enter the password (4 numerals) and press
“Enter”. The passwords for the Tooling and Supervisor user levels can be defined by the supervisor in the
CONFIGURATION menu.
USER LEVEL
Can be changed in LOGIN menu.
MENU TITLE: FUNCTION:
SUPERVISOR
Default code
2222
TOOLING
Default code
1111
OPERATOR
Default code
0000
[LOGIN] To enter the different user levels.
YES YES YES
[CONFIGURATION] To configure the feeding system.
YES NO NO
[PRODUCTION] To do the production settings.
*In OPERATOR Level jobs and materials are read only.
YES YES YES*
[FILES] To look for, rename or delete jobs and curves
YES NO NO
[HOPPER LOADER] To do the hopper loader settings,
only visible when a hopper loader is selected.
YES YES YES
[CALIBRATION] To make material calibrations, only visible when control
mode is set to GRAVI (Gravimetric).
YES YES NO
[LOADCELL] To calibrate the loadcell.
YES NO NO
[WEIGHT CHECK] To check the hopper or object weight.
YES YES NO
[CONSUMPTION] View of the total quantity of material fed by the
Dual TrueFeed.
YES YES NO
[ALARMS] View of the alarm history
*In TOOLING level the alarm configuration is invisible.
YES YES* NO
[EVENT LOG] The history of events or settings will be logged in this
menu.
YES NO NO
If you have forgotten your supervisor password, contact Conair Service at 1-800-458-1960.
When entering a wrong password the user level will be set automatically to Operator Level.
Conair Terminal
Version x.xx
Date: January 2007
Conair TrueFeed
Color in Control
Vx.x
SP-Vx.x
MENU to continue
BL Vx.x
Mac-00:12:EC:xx:xx:xx
13 Dual Feed TrueFeed Manual
To Next Page
Loading...