1. Introduction
Thank you for purchasing a Conair Dual TrueFeed. This manual is addressed to op
erators and qualified
technicians taking care of the feeding of dry additives to ensure correct use of the Conair feeder.
L IMPORTANT: THIS MANUAL MUST BE READ BEFORE INSTALLING THE FEEDER. KEEP THIS
MANUAL IN A PLACE THAT IS ACCESSIBLE FOR ALL OPERATORS.
It’s a good idea to record the model and serial number(s) of your equipment and the date you received it in the
User Guide. Our service department uses this information, along with the manual number, to provide help for
the specific equipment you have installed.
Please keep this user guide and all manuals, engineering prints and parts lists together for documentation of
your equipment.
Date:
Manual Number: UGB025-0806
Serial Number(s):
Model Number(s):
Software Version:
Disclaimer: The Conair Group, Inc. shall not be liable for errors contained in this User Guide or for incidental, consequential damages
in connection with the furnishing, performance or use of this information, including, but not limited to the implied warranties of
merchantability and fitness for a particular purpose.
1.1 Symbols
L Important note
Attention safety regulations for the operator
1.2 Terms
Operator: A person ch
arged to operate, adjust, maintain and clean the machine.
Qualified Technician: A specialized, suitable trained person authorized to execute the installation, non-
routine maintenance, or repairs requiring special knowledge of the machine and
how it operates.
© Copyright 2008, The Conair Group, Inc., All rights reserved
1 Dual Feed TrueFeed Manual
To Next Page
Loading...