Appendix 37
6.2 Parameter Control Code Chart
Use the following code values for parameter descriptions listed in Table 6.2 when specifying the format string.
The actual character depends on the character mapping used by the output device
Table 6-2. Parameter Code Control Chart
Code Description Code Description
200 Gross weight & LB/KG GR 300 Status character
201 Gross weight & LG/KG 400 Time & date per setup
202 Gross weight 401 Time per setup
203 Gross weight (no 0 blanking) 402 Date per setup
210 Net weight & LB/KG NT 600 Macro file 1 (7.9)
211 Net weight & LN/KN 601 Macro file 2 (7.10)
212 Net weight ↕ ↕ (7.11 – 7.15)
213 Net weight (no 0 blanking) 607 Macro file 8 (7.16)
220 Tare weight & LB/KG TR 700 Delay per setup
221 Tare weight & LT/KT 800 Not used
222 Tare weight 801 Not used
223 Tare weight (no 0 blanking) 802 Not used
803 Not used
999 End of file
To Next Page
Loading...