ConMed Linvatec MC9840 - 3.3 Troubleshooting

17
3.3 Troubleshooting
Table 2: Troubleshooting Guide
Symptom Possible Cause Corrective Action
Handpiece does not
operate.
• Handpiece cord not
connected securely.
• Securely connect
handpiece cord to
controller.
• Handpiece faulty. • Return for service.
Error Messages
“MOTOR OVER
SPEED”
• Handpiece and/or
System faulty.
• Replace handpiece. If
symptom is corrected,
return handpiece for
service.
“HP SERVICE
REQUIRED”
• Else, return system for
service.
“CANNOT ID
HANDPIECE”
messages display.
CONNECT
HANDPIECE
• Handpiece not
connected securely.
• Securely connect
handpiece to controller.
message displays when
the handpiece is already
plugged into the
console.
• Handpiece and/or
System faulty.
• Replace handpiece. If
symptom is corrected,
return handpiece for
service.
• Else, return system for
service.