USB to Serial Converters Manual
Version 2.0
Document Reference No.: CP_000032 Clearance No.: CP#022
Copyright © Connective Peripherals Pte Ltd 52
Revision History
Revision history (internal use only, please clearly state all changes here before saving the file)
Comments and a few edits throughout
Reviewed and comments added
Updates based on review comments completed
Clearer screenshots from new website layout
Note that installation instructions/screens show
Windows XP and refer to install guides for
other versions of Windows/MAC/Linux/CE
Changed “mains” to power outlet or AC outlet
Corrected wording in some jumper tables
Updated wiring diagrams to show termination
More detail on how to set jumpers for
termination/biasing etc.
Added FCC/CE approval section
Corrected formatting/font on cover page
Corrected formatting of table 1.
Updated legal disclaimer on front page and
added full text of disclaimer after contacts page
Updated driver page screenshots
Updated RS232 bullet points to show speeds
up to 921.6 Kbps depending on model instead
of 460Kbps as some units can do up to
921.6Kbps
Replaced EasySync with EasySYNC
Removed the FCC and CE approvals until we
have certificates for each product available
Added table on front page showing products
covered, and changed title to USB to Serial
Converters Manual
Updated images of driver page to make clearer
Updated Scotland Registered Company Number
to SC224924
Added temperature spec to the features
section.
Reviewed changes – noticed that the links need
updated prior to release.
To Next Page
Loading...
Need help?
General
