GB
22
Power Source
• This unit is designed to operate with the built-in battery.
• Connecting the unit to any other power source may cause damage
to the unit. Unwind the mains adapter cable to its full length.
Connect the end of the cable to the DC IN 12V socket at the rear of
the unit and then connect the mains adapter to the mains socket.
Make sure the mains adapter is rmly inserted into the mains socket.
It starts battery charging and the unit is now ready to use.
• Charge the internal battery for 5 hours before rst time use. It will
automatically stop charging once the battery fully charged. The
charging indicator shows the charging status.
• For better battery life, you may disconnect the mains adapter from
the mains socket after it is fully charged.
RESET DC IN 12VAUX IN
To Next Page
Loading...