EasyManua.ls Logo

Constellation ARIA - Hints and Tips; Troubleshooting: Power, Charging, and Sound; Troubleshooting: Reception and Display; Troubleshooting: Bluetooth and NFC

Constellation ARIA
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
34
Hints and Tips
If a problem does occur, it may often be due to something very minor. The
following table contains various tips.
Problem Solution
No power Ensure that the unit is fully charged.
Make sure that the unit is switched on.
Not charging Make sure the mains adapter is firmly
inserted into the mains socket.
No Sound Ensure that the unit is switched on.
Check the volume level of the unit.
Check the sound input source.
Static Sound Signal reception is too low. Adjust the
aerial or move the unit to a stronger signal
location.
Sound is distorted Volume is too high. Adjust the volume
control.
Desired station not found Weak signal. Search manually.
No coverage in your area
or poor reception
Adjust the position of the aerial.
The display is blank This may occur if the broadcaster changes
the label of a service or removes a label
while tuned. The unit will try to re-tune or
perform a scan.
I cannot find ARIA
on my Bluetooth® device.
Ensure that the unit is switched on.
Ensure that the Bluetooth® function is
activated on your Bluetooth® device.
The unit has a Bluetooth® function that
can receive a signal within 10 metres.
Keep a distance within 10 metres between
the unit and your Bluetooth® device.

Table of Contents