Constellation ARIA - FM Operation; Scanning and Audio Settings; Scan Settings

GB
30
FM Operation
Press repeatedly to select FM mode.
Auto Scan
To search for an FM station, press and hold to start the forward or
reverse scanning. ”Scanning…” will show on the display. Once a station
has been found, the scanning will stop automatically.
Manual Scan
To search for FM stations manually, press repeatedly until your
desired frequency is reached.
With FM radio, it may be necessary to ne tune each station
by pressing repeatedly. Each press will adjust the
frequency by 0.05 MHz. If reception is still poor, adjust the
position of the aerial or try moving the radio to another
location.
Scan Setting
This is a scanning option to scan all stations, or just scan stations with
strong signal.
1. Press and hold
, and then press to select <Scan setting>. Press
to conrm.
2. Press
to select <All stations> or <Strong stations>. Press
button to conrm.
Audio Setting
FM is able to search for Stereo or Mono stations.
1. Press and hold
, and then press to select <Audio setting>.
Press to conrm.
2. Press
to select <Stereo allowed> or <Forced mono>. Press
to conrm.