GB
33
NFC (Near Field Communication)
Operation
NFC enables you pair and connect with Bluetooth® devices in a easy way.
1. Make sure that your NFC is turned “On” on your mobile device.
2. Hold your mobile device about 1.5 cm close to NFC logo on the left
side of unit for receiving an auto-connection between your mobile
device and radio.
3. Your device then will turn-on Bluetooth® automatically and will pair
your device with radio. No additional settings are necessary.
AUX Operation
1. Press repeatedly to select Auxiliary Input mode.
2. Adjust the volume to the desired level by pressing VOLUME+/–
button.
3. You may operate your audio device directly for playback features.
Maintenance
Cleaning the Unit
Ensure the unit is fully unplugged from the mains socket
before cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning uids containing alcohol, ammonia or
abrasives.
• Do not spray an aerosol at or near the unit.
To Next Page
Loading...