Constellation ARIA - System Settings; Language, Software, and Reset

GB
27
Setting the Language
1. Press and hold to display the menu. Press to select <System>,
and then press to conrm.
2. Press
to select <Language>, and then press to conrm.
3. Press
the buttons to select <English>, <Norsk>, <Svenska>,
<Dansk> or <Suomi>, and then press to conrm.
Software Version
1. Press and hold to display the menu. Press to select <System>,
and then press to conrm.
2. Press
to select <SW version>, and then press to conrm.
3. The software version will show on the display. Press
to exit.
System Reset
There may be times when you need to reset your unit back to the factory
settings especially when you have moved house. If you experience
reception problems you may want to reset and try again. If you move
to another part of the country and pick up the local and national DAB
stations in that area, your previously tuned channels may no longer be
available.
1. Press and hold
to display the menu. Press to select <System>,
and then press to conrm.
2. Press
to select <Factory Reset>, and then press to conrm.
3. The display will show “Factory Reset?”. Press
to select <Yes>,
and then press to conrm.
4. The display will show “Restarting...”. Press and hold
to switch the
unit on, and the unit will start a Full scan in DAB mode.
After the system reset, all the tuned stations, DAB/FM preset
stations will be erased.