EasyManua.ls Logo

Consumer Cellular ZTE Avid 557 - Changing the Ringtone and Notification Sound; Turning System Sounds On;Off; Adjusting Volumes; Switching to Silent or Vibration Mode

Consumer Cellular ZTE Avid 557
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20 21
CHANGING THE RINGTONE AND NOTIFICATION SOUND
You can quickly customize the default ringtone for incoming calls and the
default notification sound.
1. Press the Home Key >
> Settings > Sound.
2. Tap Phone ringtone or Default notification ringtone.
3. Scroll through the list and select the ringtone you’d like to use.
4. Tap OK.
NOTE: See
Contacts – Editing Contacts – Editing Contact Details
for how to
assign a special ringtone to an individual contact.
TURNING SYSTEM SOUNDS ON/OFF
1. Press the Home Key > > Settings > Sound > Other sounds.
2. Tap the switch beside each option to turn it on or off.
ADJUSTING VOLUMES
1. Press the Home Key > > Settings > Sound.
2. Drag the sliders below Media volume, Alarm volume, Ring volume, and
Notification volume to adjust the volume for each type of audio.
NOTE: You can adjust the media volume when a media application is in use by
pressing the Volume Key. If no media application is active, press the Volume
Key to adjust ringtone volume (or the earpiece volume during a call).
SWITCHING TO SILENT OR VIBRATION MODE
You can set the phone to silent or vibration mode by using one of the
following methods.
Press the Volume Key when no media application is active to show the
volume management window. Drag the slider to the left or keep pressing
the Volume Down Key to switch the phone to vibration mode. Press the
key again in vibration mode to switch the phone to silent mode.
Swipe down from the top of the screen to open the Notification Panel and
drag the panel downwards. Tap Sound or Vibrate to switch the phone to
vibration or silent mode.
Press the Home Key >
> Settings > Sound > Notification mode and
select Vibrate or Mute to switch to vibration or silent mode.
NOTE: To restore normal sound settings, press or hold the Volume Up Key.
USING DO NOT DISTURB MODE
You can limit interruptions with Do not disturb mode. This mode silences your
phone so that it doesn’t make sounds or vibrate when you don’t want it to.
To turn on Do not disturb mode:
1. Press the Home Key >
> Settings > Sound > Do not disturb.
2. Tap Do not disturb and select Always or Scheduled.
3. Set the detailed settings.
If you have selected Scheduled, set the days and start/end time you’d
like your phone to be in Do not disturb mode.
PERSONALIZINGPERSONALIZING

Table of Contents

Related product manuals