Contax S2 - Shutter Speed LED Indicators; Flickering Shutter Speed LEDs; Continuously Lit Shutter Speed LEDs

Flickering
shutter
speed
LEDs:
These
indicate
the shutter
speed
that the
shutter
speed
dial
is
presently
set
to.
Continuously
lit shutter
speed
LEDs:
These
indicate
the
correct
shutter
speed
that should
be
used
for the
current
exposure
in relation
to the
aperture
setting
that
is
presently
selected.
"A"
(overexposure warning)
indication
(flickering)
:
This
indicates
that
the correct
shutter
speed
value that
shoufd
be
used
for the exposure
exceeds
1 l4OO0
sec.
(the
camera's
top shutter
speed).
To correct
for overexposure,
either
select
a smaller
lens
aperture
or use
an
ND filter.
'V"
(underexposure warning)
indication
(flickers):
This
indicates
that the
correct
shutter
speed
value to use
for the exposure
exceeds
1
sec.
(the
camera's
slowest
shutter
speed).
To correct
for underexposure,
either
select
a
wider
lens
aperture
if
possible,
bulb
("8")
exposure
or
switch
to
flash
photography.)
Lights/Leuchtet
S'allume/Encendida
Blinks/Blinkt
Clignote/Parpadeando
ffi
52