high-low limits, data storage (recording).
Please note in the Settings Menu:
CLICK = short press of button and PRESS =
prolonged push of button (1sec)
Figure 6. Main Menu Interface
a) Alarm setting
On the main menu interface, click the button to select
“Alarm”, Press the button (1sec) to enter the alarm
setting interface as shown in Figure 7:
Figure 7.
a. Adjusting the high and low limits of alarms
On the alarm setting interface, Click the button to
select “Dir”, then Press the button (1sec) to enter the
alarm direction setting interface as shown in Figure 8:
To Next Page
Loading...
