Contec CMS50D+ User Manual

18
Figure 8.
On the alarm direction setting interface,Click the button to
select “SpO
2
Alm”or “PR Alm”,then Press the button (1 sec)
to enter the SpO
2
or PR direction setting interface as shown
in Figure 9:
Figure 9.
Click the button to select “Dir”, then Press the button to
choose Up or Down (this will be the direction the value of
the high-low limits of SpO
2
and pulse rate will be adjusted)
To raise the SpO
2
and pulse rate limit, choose “Dir” as ‘Up’,
then Click the button to select high limit (High) or low limit
(Low),Press the button and hold to adjust the selected limit
to the desired higher value and release the button once the
higher limit has been reached.
To lower the SpO
2
and pulse rate limit, choose “Dir” as

Contec CMS50D+ Specifications

General

Brand	Contec
Model	CMS50D+
Category	Medical Equipment
Language	English