e. When the storage space is full, it displays
“Memory is full” on the screen, and then shut down in
a few seconds. But it will still display “Memory is
full” by the next time you turn on the device on the
purpose of warning the user, and a few seconds later
enter the measuring interface.
c) Uploading the data to the PC after recording
a. Please connect the device with computer by the data
line which is equipped with the device, then double
click "SpO
2
Assistant" icon which is shown as Figure 5
to open"SpO
2
Assistant" program, click the ‘View
device stored data only’ , and then click ‘Connect’.
The Software will then display “Device Stored
Data”,click the‘user’and click the ‘Receive Data’ and
click the ‘OK’ .
If you want to watch the data,you can click " "
and then choose the data to open.
b. On the main menu interface, the users to upload the
stored date to computer when the symbol "Record"
shows "off ".
d) Exit the main menu
On the main menu interface, Click the button to select
"Exit", then press the button to exit the main menu.
To Next Page
Loading...
