Contec COM-1PD(USB)H - 2 Setup; What Is Setup; Installing the Driver

To Next Page

To Previous Page

2. Setup

COM-1PD(USB)H

Setup

This chapter explains how to set up the converter.

What is Setup?

Setup means a series of steps to take before the product can be used.

Different steps are required for software and hardware.

Installing the driver

This section enables you to prepare the software and hardware by operating in accordance with each

step in this chapter using the bundled CD-ROM. Taking the following steps sets up the software and

hardware. You can use the diagnosis program later to check whether the software and hardware

function normally.

Step 1 Setting the Hardware

Step 2 Installing the Hardware

Step 3 Initializing the Software

Step 4 Checking Operations with the Diagnosis Program

If Setup fails to be performed normally, see the “Setup Troubleshooting” section at the end of this

chapter.