pop up.Input the query condition, click [Query], and the expected results will occur. Click
[Clear], and the system will delete all the querying conditions input.(See Figure 13-7)
Figure 13-7
Here, [Cond.And] and [Cond.Or] are matching modes for querying condition ,and only one can
be selected. If you select [Cond.And] ,the displayed querying results have to satisfy all the
conditions input; while for[Cond.Or], they only need to satisfy any conditions input.
Suggestion: In case of multiply cases, it is better to input all decided querying conditions ,
select [Cond.And] to find the corresponding case quickly.
13.6 Case Review
In case management interface, select the case you want to review, click [Review] to pop up the
dialogue box shown below ,which displays case information , here you can edit content, click
[Save] to confirm modification and note it is not reversible.(See Figure 13-8)
Figure 13-8
After ensure the selection, click [Review] to enter the review interface shown below, which is
similar to the gathering interface.(See Figure 13-9)
Execute querying
To Next Page
Loading...
Need help?
General
