Figure 13-11
Here, click the button[Default], and the system settings will back to default.
Each item, its options and explanation are shown in the table below.
Item Options Explanation
Back-light
30Seconds/1Minute/
2Minutes/5Minutes/
10Minutes/Always On
If there is no operation for the time selected, screen
backlight will be turned off. Select "Always On" to
keep screen backlight on.
Light-degree
[90%degree]/[80%degre
e]/
[70% degree]/[ 50%
degree]
After setting light degree, the screen will display
different backlight strength.
Auto off
[1 minute]/[3 minutes]/
[5 minutes]/[10
minutes]/
[15 minutes]/[30
minutes]/
[60 minutes]/[None]
If there is no operation for the time selected, the
system will power off automatically. Select "None"
and the system will not power off automatically.
Low Power
[Always]/[Only
once]/[None]
When in low power, this can decide the alarm
method.
Filter Freq
[50Hz/35Hz]/[50Hz/25H
z]
/[60Hz/25Hz]/[60Hz/35
Hz]
Set up the parameter compounding of AC Filter
and EMG Filter.
Language [English]/[Chinese] Set up the language displayed.
Hospital Custom Custom the name of hospital
Heartbeat
Sound
[ON]/[OFF] Set the heartbeat sound
To Next Page
Loading...
