Contec SPC-8520-LA - Page 15

2. System Reference
8
SPC-8520-LA , SPC-8521-LA
Table 2.1. Functional Specifications <2/2>
Type
SPC-8520-LA SPC-8521-LA
The RTC (real-time clock) and CMOS data backup by the lithium battery.
The Lithium battery specification is shown in table
Specification BR-2/3AC2P
Voltage 3V
Capacity 1200mAh
Weigh 15.5g
RTC/CMOS
* Backup time: Over 10 years at none AC power 25ºC.
* Real Time Clock accurate: ±3 minutes/month at 25ºC.
Power Management
Power management setup via BIOS
Modem Ring On/Wake On LAN
Supports PC98/PC99 ACPI Power management
Bus specification/Size(mm) PCI / 185(L) x 122(H) x 28(W) PCI / 185(L) x 122(H) x 41(W) *2
DC Power Requirements
+5VDC±5%
+12VDC±5% (For fan)
+5VSB(Stand by) ±5%(Only when using the ATX power supply)
Power supply specifications
(Max.)
Pentium M 1.6GHz
+5VDC±5%, 9.0A
+12VDC±5%, 0.1A (For fan, Average)
+5VSB (Stand by) ±5%, 0.5A
+5VDC±5%, 5.0A
+5VSB (Stand by) ±5%, 0.5A
Operating temperature /
Operating Humidity
0 - 60°C *3 / 10 - 90%RH
(No condensation)
0 - 50°C / 10 - 90%RH
(No condensation)
Storage temperature -20 - 80°C
Floating dust particles Not to be excessive
Corrosive gases None
Weight 390g 450g
Operating System Support
Windows XP Professional
Windows XP Home Edition
Windows 2000 Professional
*1This CF Card slot do not have the hot-swap function. The card cannot remove from slot and attach to slot at the time of
a power supply ON. The card may be damaged if a power supply is turned off at the time of card access.
*2 The one up to 122mm or less in the size of board can be used for two next slots of this board (one substance slot).
Max.122mm
Board
PCI Slot
Heat Sink
*3 It depends on the specification of the CPU and the heat-sink.