General information
The manufacturer accepts no liability for any consequences resulting from inappropriate, negligent
or incorrect installation or adjustment of the optional operating parameters of the equipment or from
mismatching the drive with the motor.
The contents of this guide are believed to be correct at the time of printing. In the interests of a
commitment to a policy of continuous development and improvement, the manufacturer reserves the
right to change the specification of the product or its performance, or the contents of the Advanced
User Guide, without notice.
All rights reserved. No parts of this guide may be reproduced or transmitted in any form or by any
means, electrical or mechanical including photocopying, recording or by any information-storage or
retrieval system, without permission in writing from the publisher.
Important...
Servo-amplifier software version
This product is supplied with the latest version of user-interface and machine-control software. If this
product is to be used with other Control Techniques servo amplifiers in an existing system, there may
be some differences between their software and the software in this product. These differences may
cause a difference in functions. This may also apply to servo amplifiers returned from a Control
Techniques Service Centre.
If there is any doubt, contact a Control Techniques Drive Centre.
Copyright © January 2003 Control Techniques Drives Ltd
Issue Code: 4
To Next Page
Loading...
Need help?
General
