*
M’Ax Advanced User Guide 38
Issue Number: 4 www.controltechniques.com
8 Menu 6 Parameters - Sequencer Functions, AC Supply Loss
Modes
Parameter
Range(
ô
) Default(
ð
)
Type
6.01 Stop mode selector 0~2 2 RW Txt P
6.03 AC supply loss mode selector 0~1 0 RW Uni P
6.08 Hold zero speed select 0~1 1 RW Bit
6.15 Drive enable 0~1 1 RW Bit
6.20 Powered-up time (years, days) 00.00 ~ 9.365 y.d
RO Uni S P
6.21 Powered-up time (hours, minutes) 00.00 ~ 23.59 h.m
RO Uni S P
6.31 Sequencing bit JOG FORWARD 0 ~ 1 0 RW Bit
6.32 Sequencing bit JOG REVERSE 0 ~ 1 0 RW Bit
6.33 Sequencing bit FORWARD/REVERSE 0 ~ 1 0 RW Bit
6.34 Sequencing bit RUN 0 ~ 1 0 RW Bit
6.35 FORWARD LIMIT switch 0 ~ 1 0 RW Bit
6.36 REVERSE LIMIT switch 0 ~ 1 0 RW Bit
6.44 Active supply indicator 0~1
RO Bit
6.48 DC-bus threshold voltage 0 ~ 600 400 RW Uni
6.49 Controlled-stop enabled indicator 0~1
RO Bit
6.50 UV warning threshold 0 ~ 600 400 RW Uni
To Next Page
Loading...
