*
37 M’Ax Advanced User Guide
www.controltechniques.com Issue Number: 4
For drive's internal system purposes only.
The settings of parameter 5.54 are as follows:
0 = Ranges are as shown for 3.18 and 3.20
1 = Ranges are divided by 10
The value of this parameter needs to be known before programming 3.18 and 3.20.
5.52 Reserved for internal system purposes
5.53 Reserved for internal system purposes
5.54 Inertia range select
ô
0~1
ð
SLM RW Bit
To Next Page
Loading...
