Control Techniques Unidrive 2403 User Manual

Safety
Information
Product
Information
Mechanical
Installation
Electrical
Installation
Getting
Started
Menu 0
Running
the motor
Optimisation Macros
Advanced
Parameters
Technical
Data
Diagnostics
UL Listing
Information
196 Unidrive User Guide
www.controltechniques.com Issue Number: 9
If a drive System is included as part of equipment covered by a separate
EMC product standard, the EMC standard for the complete equipment
applies.
*RFI filter(s) are recommended where sensitive electronic systems are
operating nearby.
NOTE
Power Drive Systems standard EN61800-3
Model size
Environment category
First environment Second environment
Restricted distribution Unrestricted distribution Either distribution
UNI1201 to UNI3204
UNI1401 to UNI4401
(Rated input current of drive
<100A)
Specified RFI filter required
Using the specified RFI filters and following the
wiring guidelines given in Figure 4-12 on
page 48 may not ensure that the radiated
emission limits are met. Additional filtering may
be required in this environment.
Specified RFI filter required
UNI4402 to UNI5408
(Rated input current of drive
>100A)
Specified RFI filter required
Using the specified RFI filters and following the
wiring guidelines given in Figure 4-12 on
page 48 may not ensure that the radiated
emission limits are met. Additional filtering may
be required in this environment.
No RFI filter required *

Control Techniques Unidrive 2403 Specifications

General

Brand	Control Techniques
Model	Unidrive 2403
Category	Controller
Language	English