Convotherm 4 Series User Manual

6.3.3 Test the water quality
Materials required
You will need the following materials:
■
1 sample container for taking samples
■
1 conductivity meter (part no. 3019007)
■
Analysis kit for measuring general hardness and carbonate hardness, including two analysis con‐
tainers (part no. 3019010)
■
Protective gloves
Test the water quality
Measure the electrical conductivity and general hardness of the water By following the instructions in‐
cluded with the tester and analysis kit.
Compare the measured values with the recommended values listed under the 'Water quality' heading
in the 'Technical data' on page 138 chapter.
6 Installation
100

Convotherm 4 Series Specifications

General

Model	Convotherm 4 Series
Category	Oven
Temperature Range	30°C to 300°C
Type	Combi Oven
Cooking Modes	Steam, Convection, Combination
Steam Generation	Yes
Cleaning System	Automatic Cleaning System