5.12 Setting up a floor-standing unit on the floor (marine model)
Rules for setting up the appliance safely
Observe the following rules to ensure that the appliance is installed in a stable situation:
■
The appliance must be screwed or welded to the floor using the appropriate parts.
■
It must be possible to wheel the loading trolley up to the cooking chamber on a flat surface that is
clear of obstructions.
Setting up the appliance
1.
Place the appliance in position and fix the four flanged
feet permanently to the floor by screw-fastening or weld‐
ing.
2.
Ensure the appliance is horizontal by adjusting the height
of the appliance feet.
Use a spirit level to ensure the unit is horizontal in all di‐
rections.
Make sure that the loading trolley can move freely into the
appliance and stands horizontally in the appliance.
The absolute tilt of the appliance in operation must not
exceed max. 2° (3.5%).
5 Setting up the appliance
75
To Next Page
Loading...
Need help?
General
