Item Safety device Function Check
5
Venting position of ap‐
pliance door
Prevents scalding of user's
face and hands from escaping
steam
When appliance is at low tem‐
perature, check door positions
as described in 'Opening and
closing the appliance door
safely' in the user manual
6
(no picture)
Safety thermostat
■
Boiler
■
Cooking chamber
Switches off the appliance if
temperature too high
An error code is output in the
event of a fault
(Please contact an authorized
service company to reset the
safety thermostat)
7
(no picture)
Restart after power
failure in case clean‐
ing agent was left in
the appliance
Restarts fully automatic oven
cleaning in a defined state af‐
ter power failure
None
8
(installed by
customer)
Disconnection device
■
Installed by the customer
close to the appliance; easi‐
ly visible and accessible, 3-
pole action, minimum con‐
tact separation 3 mm.
■
Used to disconnect the ap‐
pliance from the power sup‐
ply during cleaning, repair
and servicing work and in a
hazardous situation
Action:
■
Trip the disconnection de‐
vice
■
Check at the -X10 terminal
strip on the appliance that
none of the three phases
carry a live voltage
9
(installed by
customer)
Gas shut-off device
■
Installed by customer close
to appliance in easily acces‐
sible position and clearly la‐
beled
■
Used to disconnect the ap‐
pliance from the gas supply
during cleaning, repair and
servicing work and in a haz‐
ardous situation
Action:
■
Close gas shut-off device
■
Check that the appliance is
isolated from the gas supply
10
(no picture)
Only when installing
on a wheeled stand:
Retaining device
Restricts the range of move‐
ment of the assembly (plat‐
form plus appliance) at the
customer's site.
Check that the retaining de‐
vice is connected
3 For your safety
38
To Next Page
Loading...
Need help?
General
