Item Safety device Function Check
4
Suction panel in cook‐
ing chamber; can only
be removed using a
tool
Prevents access to the mov‐
ing fan and ensures good
heat distribution
See 'Releasing and securing
the suction panel' in the User
manual
5
Built-in preheat bridge
in appliance door
Prevents scalding from es‐
caping steam when the load‐
ing trolley is not in the appli‐
ance during preheating
None
6
(no picture)
Safety thermostat
■
Boiler
■
Cooking chamber
Switches off the appliance if
temperature too high
An error code is output in the
event of a fault
(Please contact an authorized
service company to reset the
safety thermostat)
7
(no picture)
Restart after power
failure in case clean‐
ing agent was left in
the appliance
Restarts fully automatic oven
cleaning in a defined state af‐
ter power failure
None
8
(installed by
customer)
Disconnection device
■
Installed by the customer
close to the appliance; easi‐
ly visible and accessible, 3-
pole action, minimum con‐
tact separation 3 mm.
■
Used to disconnect the ap‐
pliance from the power sup‐
ply during cleaning, repair
and servicing work and in a
hazardous situation
Action:
■
Trip the disconnection de‐
vice
■
Check at the -X10 terminal
strip on the appliance that
none of the three phases
carry a live voltage
9
(installed by
customer)
Gas shut-off device
■
Installed by customer close
to appliance in easily acces‐
sible position and clearly la‐
beled
■
Used to disconnect the ap‐
pliance from the gas supply
during cleaning, repair and
servicing work and in a haz‐
ardous situation
Action:
■
Close gas shut-off device
■
Check that the appliance is
isolated from the gas supply
3 For your safety
40
To Next Page
Loading...
Need help?
General
