Convotherm OGS 6.10 - Page 155

Service Handbook OEB/OES/OGB/OGS
6.5 Probe fitting / Probe assembly and replacing
See Chapter 6.5.5 
Safety thermostat on gas
units with blower burner
See Chapter
6.5.5  Screw
in probe
See Chapter 6.5.4 
Safety thermostat on
flan
g
e immersion heater
See Chapter 6.5.2 
Safety thermostat
behind motor fastenin
g
See Chapter 6.5.3 
Probe with stuffing
bush assembl
y
See Chapter 6.5.1 
Safety thermostat
above unit ceilin
g
AS/11-2011 6_05e_Probe assembly and replacing_b
Page 1 / 5