EM 6400 User Manual v03.02. – d12
22
3.3.1.Auto-Scroll
Auto-Scroll allows you to monitor a group of Display Pages sequentially, every 5 seconds,
without constant key pressing. This is convenient for viewing from a distance. Since the EM
6400 displays the Parameter Name (1 sec) followed by the Value (4 sec) on the same large
displays, both are equally readable from a distance. No more squinting at a clutter of
parameter indicators.
To enter auto-scroll, go to the desired display page and keep the Up or Down key
pressed for minimum 3 seconds, then release key. The display flashes “Auto” and then
automatically scrolls through other pages at the same level (column in the above table). Press
any key to revert to Manual Scrolling.
• The Up key enters Page Auto-scroll – within the TURBO Pages,
• The Down key enters Full Auto-scroll- down the entire column of pages.
3.3.2.Default Display (View) Page – Only in v03.02.11 & v03.02.12 EM6436
& EM6433
You can select any page as “User-Set” display page. You can scroll to other display pages.
The “User-Set” page is displayed 2 minutes after manual scrolling was stopped by the user.
How to lock?
• Go to the page you want to set as default page
• Press and keys together
How to unlock?
• Once Default Display Page is active, press and simultaneously to unlock the Key
page meter displays”ULOC”.
Note: Entry in to set up (PROG) is allowed when the” Display Page” is unlocked.
3.3.3.TURBO key
The TURBO key scrolls through the following pages:
’VLL, A, PF’ ‘VLN, A, F’ ‘VA, W, VAR’ ’ W, VAR, PF’ ‘PF1, PF2, PF3’ ‘'
''
'1,
'
''
'2,'
''
'3’ ‘A%1, A%2, A%3’ ‘VA.d, R.d, t.r’ ‘md, hr’ ‘VAh’ ‘Wh’ ‘R.VAh’
‘R.Wh’ ‘t.VAh’ ‘t.Wh’. This gives simple one-touch access to the most commonly used
parameters, even for unskilled operators. “One-touch” does not operate in the PROG menu -
Setup. Optional parameters are with bold characters.
Note EM6436, TURBO key scrolls through the following pages:
RMS (home page), VLL, A, PF VLN, A, F A, W, PF PF1, PF2, PF3 Wh and Run
hours.
EM 6433, TURBO key scrolls through the following pages:
RMS (home page), A, W Wh and run hours
• If you’re lost, the TURBO key is a quick way to get back to the RMS home page.
• Continuous pressing for 3 seconds initiates Auto-scrolling through the above TURBO
pages.
To Next Page
Loading...
Need help?
General