OPERATING INSTRUCTIONS
HOW TO USE THE
M
M
E
E
N
N
U
U
B
B
U
U
T
T
T
T
O
O
N
N
S
S:
There are 6 MENU BUTTONS pre-programmed for your pressure cooker. They are RICE,
CHICKEN, SOUP/STEW, FISH/VEGETABLES, BEANS & MEAT. The default times are pre-set
for quick and easy cooking for small portions of food. (When cooking food that is more
than 3lbs. or more than 6-cups, please use the PRESSURE COOK TIME BUTTON. Each of the
default times is programmed to detect the weight of food being cooked and how much
liquid is inside the pot during the cooking cycle. The unit will automatically build up the
pressure, cook the food and go to KEEP WARM when cooking is complete.
1. Prepare desired food and place into cooking pot.
2. Secure the Lid (2) onto the unit, turn it Counter-clockwise to lock it properly in place.
3. Make sure the Pressure Limiting Valve (3) is set to the “Airtight” position.
4. Plug the power cord into a 120V power outlet.
5. The LED screen will display 0000.
6. Choose the desired MENU BUTTON. The Default Cook Time will display for the
selected setting. For example, if RICE is selected, the display will show P10. There is
no need to press any other button.
7. The RICE Indicator will blink five times and then illuminate solid once it begins
operation.
While the unit is building up pressure the display will show 0010. The unit may
take between 5-20 minutes to build up pressure depending on weight of
contents inside.
When pressing a MENU BUTTON, the LED screen will not immediately change until the
pressure has built up to capacity. This may take approximately 5-10 minutes depending
on the quantity of food you are cooking.
8. The pressure cooker will begin to operate based on a cooking time of 10 minutes.
When proper pressure is achieved, the display will show P:10 and the cooking time
will begin to countdown. (The time displayed will depend on the selected MENU
BUTTON and the DEFAULT COOKING TIMES CHART).
9. When the unit has pressurized, it will begin to pressure-cook the food. You may
To Next Page
Loading...
