CX3G/FX3GC PLC Programming manual
www.coolmayplc.com
No. 03: Read the retentive register and get the current binary value in one or more
retentive registers, ranging from 1-32.
No. 04: Get the current binary value in one or more input registers, range 1-32.
No. 05: Force a single coil to force the on/off state (write bit) of a logic coil, range 1.
No. 06: Load specific binary values into a holding register (write register), range 1
No. 15: Force multiple coils, forcibly open and close a series of continuous logic coils
(write multiple bits), range 1-512.
No. 16: Preset multiple registers, load specific binary values into a series of
consecutive holding registers (write multiple registers), range 1-32.
04 register input readout.
Program Example
Master program
To Next Page
Loading...
