Need help?Do you have a question about the Coolmay C600S and is the answer not in the manual?
Safety precautions for product application.
Safety guidelines for wiring the servo drive.
Precautions for safe operation of the servo drive.
Safety considerations for the working environment.
Steps for inspecting the servo drive and motor after unpacking.
Identification and introduction of the servo drive's front panel components.
Instructions for installing the servo drive and motor, including environment.
Technical specifications for the C600S servo drive models.
Explanation of the naming structure for servo drives.
Explanation of the naming structure for servo motors.
List of compatible servo motors and their matched drives.
Physical dimensions and mounting details of the servo drive.
Physical dimensions and mounting details for servo motors.
General diagram and notes for servo system wiring connections.
Details on connecting the main power and regenerative resistance terminals.
Introduction to control signal terminals and CN1 pin distribution.
Guidelines for anti-jamming and noise reduction in wiring.
Explanation and wiring for position control operation mode.
Explanation and wiring for speed control operation mode.
Explanation and wiring for torque control operation mode.
Setup and parameters for the origin regression function.
Overview of the drive's front panel display and keys.
Step-by-step guide on how to set drive parameters.
How to monitor the servo drive's operational status.
Procedures for zeroing analog quantities and resetting default parameters.
Detailed explanation of parameters in the FA group.
Detailed explanation of parameters in the F3 group for multifunctional terminals.
Detailed explanation of parameters in the F4 group for internal position command.
Configuration of communication parameters for RS-485.
Methods for writing, reading parameters, and monitoring drive status.
Comprehensive list of error codes and their meanings.
Detailed guide for processing and resolving alarms.
Record of changes and updates made to the manual.
General| Series | C600S |
|---|---|
| Communication Ports | RS232, RS485, Ethernet |
| Power Supply | 24V DC |
| Ethernet Ports | 1 |
| Display | TFT LCD |
| Memory | 128MB |
| Programming Software | Coolmay Programming Software |
| Storage | 128MB Flash |
| USB Ports | 1 (USB Host) |
| Serial Ports | RS232, RS485 |
| Power Input | 24V DC |
| Operating Temperature | 0°C to 50°C |
To Next Page
