Coolmay C600S - Operation Safety; Working Environment Safety

 The U、V、W motor output terminal and the motor wiring terminal must be
connected one-to-one correspondence, otherwise the motor may cause
equipment losing and casualties caused by the over speed vehicle.
 Please fasten the power supply and motor output terminals, otherwise it may
cause fire.
3.Operation
Caution
 When the mechanical equipment starts operation, it must match proper
parameters. If it does not adjust to the appropriate setting values, it may cause
the mechanical equipment to lose controlling.
 Before starting operation, please confirm if you can start emergency switch
shutdown at any time.
 Please test whether the servo motor is running normally without load firstly,
and then connect the load to avoid unnecessary loss.
 Do not switch on and off power frequently, otherwise it will cause drive
overheating.
4.Working
Prohibition

When the motor is running, it is forbidden to touch any parts in rotation,
otherwise it will cause casualties.

When the equipment is in operation, it is forbidden to move connecting
cables, otherwise it will cause injury to the person or damage to the
equipment.