Coolmay C600S - Chapter 7 Parameters; FA Group Parameter Details; F3 Group Parameters; F4 Group Parameters

Chapter 1 Product Inspection And Installation
www.coolmay.com
4
Pic 1.2 Installation Interval
1.3.2 Environment Condition For Installation
Since the environment conditions for servo driver installation have the direct influence to
the normal function and service life of the servo driver, therefore the environment conditions
must be conformed to the following conditions:
 Ambient temperature: 0 to 40℃; Ambient humidity: less than 80% (no condense).
 Storage temperature: -40 to 50℃; Storage humidity: less than 93% (no condense).
 Vibration: less than 0.5G.

Preventive measure shall be taken against raindrop or moist environment.

Avoid direct sunlight.

Preventive measure shall be taken against corrosion by oil mist and salinity.