9
Option 1-4: Changing your User Code
This option enables you to change your own
user code. To make changes for other users,
refer to page 20.
User 1 Menu 4
Change Code
1. Press [ to select this option.
Enter new code..
----
2. Enter your new code,
for example press 9 8 7 6, then [.
Z
If your new code is not accepted, the
display shows "NOT ACCEPTED try a
different code". This usually means that
the code is already in use. Press r enter
the code again.
Z
If your system is set up to use four digit
codes then the default user code is: 5
6 7 8. Your system may be set up to
use six digit user codes. If so, then the
default user code is 5 6 7 8 0 0
1
.
1
Requires option 01 to be set to “6 digit codes” in Engineer menu 1-9-3.
To Next Page
