2
Accessing the User Menus
To access the user menus:
BANNER TEXT
17:30 Sun 01 JAN
1. Enter your user code or present your
proximity tag.
0=Set Selection
[Ent]=User Level
2. Press [.
User Level 1
Press [Ent]or[2]
3. Press [ if you want to enter User Menu
1. If you want to enter User Menu 2, press
|, ¬ or 2 until "User Level 2" is
displayed, then press [.
User 1 Menu 1
Test Menu
The first option in the selected menu is
displayed. The example shown opposite is
the first option in User Menu 1.
Z
Access to options depends on user type
(page 21).
Selecting Options
You can select options in two ways:
1. Press | and ¬ until the required option
is displayed, then [.
2. Press a numeric "hot" key (0 to 9), e.g.
press 2 to display Omit Zones, then [
to select the option.
Exiting from the User
Menus
To return the system to its normal operating
state, press ] to step back through the
menus until the time and date are
displayed.
To Next Page
Loading...
