20
Option 2-4: Setting Up User Codes
This option allows you to define users to
operate the alarm system. When setting
up a user, you need to specify:
• A user code. This is the code that the
user enters at the keypads (for
example, to set or unset the system).
• A user type (e.g. Manager). This
determines, for example, the range of
user options the person can access.
The user’s access to menu options is
initially determined by the user type
selected, but can be customised, if
required (see page 26).
• The wards the user is assigned to. Users
can set, unset and reset any of the
wards assigned to them.
• Whether certain wards set or unset
automatically during a set/unset.
Z
A user cannot set up or modify users
with a lower user number (e.g. User 03
cannot modify User 02).
Z
To delete a user, set the user type to
"Not in use".
This option also allows you to program the
functions of telecommand buttons. You
can program individual buttons to set
various setting groups, and unset wards.
You can allocate the PA function to specific
wards, and give the telecommand a
meaningful name (up to 16 characters
long).
To Next Page
Loading...
