36
Option 2-9: Using the Log
Option 2-9-1:
Viewing the Log
This option enables you to view the contents
of the system log. The log contains the date
and time of system events, such as wards
being unset, zones omitted, duress code
activations and communications problems.
For more information about the event
codes displayed, see page 56.
The number of events recorded in the log is
model specific.
User 2 Menu 9
Log
1. Press [ to select this option.
Log Functions 1
View Log
2. Press [ to select View Log.
UNSET WARDS:
10:50:10 23/04
3. Press | or ¬ to scroll through the events
(| displays earlier events). To move to
the next event of a given type, press:
1 Alarms 6 User codes
2 24 Hour Alarms 7 Set Wards
3 Fire Alarms 8 UnSet Wards
4 PA Alarms 9 Entry
5 Zone Tampers
Ward : 12......
10:50:10 23/04
4. If appropriate, press r to display further
details of the event. Pressing 0 allows
you to view events from a specified
offset (position) in the log.
5. Press ] to exit.
To Next Page
Loading...
